RubberMill die cuts and slits polyurethane foam for OEM’s in the appliance and industrial markets. Foams can be supplied with Pressure Sensitive Adhesive and are available to meet customer specifications, or you can select from one our stock materials specified below. Contact RubberMill for your stripping and die cut urethane foam needs.

Polyurethane Foam
RubberMill Part No. RFO19G1.2 RFO19G2.0 RFO19G4.0
Polymer Ether Based Ester Based Ester Based
Color Charcoal Charcoal Charcoal
Density 1.2 lb/ft3 (+/- 0.1 lb/ft3) 2.0 lb/ft3 (+/- 0.2 lb/ft3) 4.0 lb/ft3 (+/- 0.4 lb/ft3)
Compression Force Deflection (CFD)
@25% (minimum)
0.40 psi 0.50 psi
Indentation Force Deflection (IFD)
@25% Deflection (minimum)
37 lbs/50 in2
Tensile Strength
(minimum)
10 lb/ft2 18 psi 20 psi
Elongation (minimum) 100% 170% 200%
Tear Resistance 1.5 lb/linear inch 2.0 lb/linear inch 2.0 lb/linear inch
Compression Set 50% 20% max
(@90% comp)
8% max
(@50% comp)
10% max
(@50% comp)
Flammability Pass MVSS302 and CAL117 Pass MVSS302, UL94, HF-1 Pass MVSS302, UL94, HF-1
Properties are typical values. Reference ASTM test method D3574-08. Final determination for suitability for use must be made by the customer. (12/16)